Sunday, September 28, 2014
Saturday, September 27, 2014
Friday, September 26, 2014
Thursday, September 25, 2014
Tuesday, September 23, 2014
New Factory Meeting on Site ATEC 22/09/14
Concerner
1.TCT >> Nop, Bee
2.Plus >> Tong, Kob, Etc..
3.ATEC >> K.Hang, K.Pui, Tor
4.Prism >> K.Phuchong, K.Bom, Etc..
Topics.
1. Gutter on the west side, we have to drop the beam down and then put the gutter on the beam.
2. For the waste water from cooloing tower / chiller, we will make the small tank underground and put the tube from tank to tank (Transfer side) pass the center of building, we will use the pump to send the water.
3. Water drained from wet tank and Air compresser, we will make the small tank underground and put the tube from there to the tank of cooling tower, we will use the pump to send the water.
4.For the size and the doors of Air compresser area/building.
1.TCT >> Nop, Bee
2.Plus >> Tong, Kob, Etc..
3.ATEC >> K.Hang, K.Pui, Tor
4.Prism >> K.Phuchong, K.Bom, Etc..
Topics.
1. Gutter on the west side, we have to drop the beam down and then put the gutter on the beam.
2. For the waste water from cooloing tower / chiller, we will make the small tank underground and put the tube from tank to tank (Transfer side) pass the center of building, we will use the pump to send the water.
3. Water drained from wet tank and Air compresser, we will make the small tank underground and put the tube from there to the tank of cooling tower, we will use the pump to send the water.
4.For the size and the doors of Air compresser area/building.
Monday, September 22, 2014
Sunday, September 21, 2014
21 ข้อคิดดีมาก
21 ข้อคิดดีมาก..️️ขอมอบ
แด่กัลยาณมิตรทุกคน
http://www.bloggang.com/m/mainblog.php?id=raveetawan&month=24-03-2014&group=6&gblog=6
อ่านแล้วอ่านอีก อ่านได้เรื่อยๆ ไว้เตือนสติตนเอง
Saturday, September 20, 2014
Friday, September 19, 2014
Tuesday, September 16, 2014
Sunday, September 14, 2014
ให้ฉันตายเสียดีกว่าไปจากที่นี่
I would rather do something than do something else.
ให้ฉัน ทำสิ่งหนึ่ง เสียยังดีกว่า ทำอีกสิ่งหนึ่ง
ให้ฉันตายเสียดีกว่าไปจากที่นี่
I would rather die than leave here.
6B
ลด ละ เลิก พฤติกรรม 6B
1. Ble (เบิ้ล) การทับถม ดูถูก ทำให้ได้อาย ปรามาส เช่น ทำได้เหรอ จนกว่า ตำแหน่งต่ำกว่า โง่กว่า ล้วนเป็นพฤติกรรม ทำลายองค์กร และสังคมไทย ทั้งสิ้น อย่างการล้อเลียนนักฟุตบอล ว่าเหยิน ห้อย ฯลฯ ตามลักษณะที่ผิดปกติของอวัยวะ ถือว่าสื่อกีฬาไทยมีมารยาทที่ต่ำมาก
ว่ากันว่านักการเมือง โจรผู้ร้าย ผู้บริหาร หัวหน้าที่ งกๆ เค็มๆ เผด็จการ ล้วยคาใจ มีปม โดนล้อ โดนดูหมิ่น กับเรื่องเหล่านี้ในวัยเด็กมาก่อนทั้งสิ้น
2. Bee (บี้) กดดัน เร่ง บีบคั้น จนผู้คนเคลียด ลนลาน สั่น ประหม่า ทำให้เกิดความผิดพลาดได้ง่าย
3. Bai (ใบ้) การเงียบ ไม่พูด ไม่แสดงความคิดเห็น อาจจะเกิดจากเคยโดนด่า เคยโดนด่า เคยโดนล้อมาก่อน หรือเรียนรู้ว่าพูดมากไปก็โดนทำมาก พูดไปก็เท่านั้น หัวหน้าไม่เคยฟัง ฯลฯ เมื่อไม่พูด ไม่สื่อสาร ไม่เตือนกัน ไม่ฝากงานกัน ฯลฯ ความสามัคคีก็พัง ความผิดพลาดก็เพิ่ม
4. Boay (โบ้ย) การโยน แบบโยนความผิด โยนความรับผิดชอบ ปัดเรื่อง พูดมั่ว อ้างมั่ว ไม่ยอมรับความจริง อ้างดินฟ้าอากาศ อ้างไปเรื่อย อาจเกิดจากการเรียนรู้ว่าหากใครพูดความจริวกับเจ้านายจะโชคร้ายเสมอ เพราะเจ้านายท่านกรี๊ดๆ ปรี๊ดๆ จี๋ดๆ ของขึ้นทุกครั้ง ด่าแหลก แค้นอีกต่างหาก ดังนั้น ใบ้ๆโบ้ยๆไปก่อนปลอดภัยกว่า นี่แหละเจ้านายที่ใจแคบ ฟังความจริงไม่เป็น แถมยังปากเสีย ก็มักจะเจอแต่เรื่องโกหก
5. Block (บล๊อก) การห้าม ดับความหวัง ดับดาวรุ่ง ส่วนใหญ่มากจากเจ้านาย หัวหน้า ที่กลัวที่จะทดลอง ไม่กล้า คำพูดที่แสดงออกถึงสิ่งเหล่านี้คือ "ที่ไหนเคยทำสำเร็จมาแล้วบ้าง" "ถ้าผิด คุณรับผิดชอบนะ" "ทำไม่ได้หรอก" ทั้งๆที่ไม่เคยทำ สิ่งนี้ทำให้องค์กรขาดนวัตกรรม คิดเองไม่เป็น แต่ตำหนิเก่ง ไม่น่าเชื่อ เรามัคนแบบนี้เยอะจริงๆ
6. Blame (เบลม) การตำหนิ ซึ่งตำหนิกันบ่อยๆ ความมั่นใจก็หายไป การกุมอำนาจก็เกิดขึ้น ไม่มีการแบ่งอำนาจ ไม่มีใครกล้าเสี่ยง ขั้นตอนการทำงานมากขึ้น งานไม่สนุก ไม่มีใครอยากทำ ลูกค้าเดือดร้อนในที่สุด
Importance Buddha's teaching
อิทธิบาท 4
อริยสัจ 4
พรหมวิหาร 4
Saturday, September 13, 2014
It hits home.
Hitting home.
I'm so into this book.
Thursday, September 11, 2014
Business English Link
http://www.ego4u.com/en/business-english/infos
11.09.14
Today, it's normal day. I have joined meeting "LOA" and then the Management meeting (I had lunch too.). Mostly talking about "มยส." rule, P'Nu was doing it for flow chart.
And others
1. We tried to use 3D printer, we have printed sample and parts of Garnish's assembly jig. It may be OK.
1. We tried to use 3D printer, we have printed sample and parts of Garnish's assembly jig. It may be OK.
2. To confirm Lynn for visiting TCT in 15-17 Sep 14. 15 Sep., TopTrend will pick up them from airport.
3. To made the list of issues for discuss with HD.
4. Consider VDO Conference "RADVISION", it's very expensive. But K.Vathit assigned to K.Somboon (SAHAPAT) told me for CISCO which we should buy and he sent data to us already.
Subscribe to:
Posts (Atom)





























